Olé Terracotta High-Gloss Sealer

Coverage Estimates

Actual coverage depends on the surface’s texture, porosity, and overall condition, as well as weather and application technique.

• First coat: Covers approximately 150–200 sq. ft. per gallon
• Additional coats: Covers approximately 200–300 sq. ft. per gallon
  

FEATURES

• Water-based Saltillo Sealer
• Use indoors and outdoors
• Builds film with fewer coats
• Resists oil, grease and food stains
• Hardens tile against chipping and abrasion
• Gives a long lasting, high gloss appearance
• Protects and beautifies
• Water based -- safe, easy cleanup

Test Before You Begin

Due to the natural variation of tile and surface materials, we highly recommend applying several small test patches in inconspicuous areas. This helps ensure optimal performance and reveals any subtle shading differences that may occur on certain substrates.

Surface Preparation

Surface prep is essential for proper adhesion and long-term performance. Before sealing:

• Make sure surfaces are completely clean, dry, and free of oil, wax, grease, or dirt.
• Fully neutralize and rinse the surface before applying Olé.

Application Instructions

• Apply Olé using a sponge applicator, brush, or low-pressure sprayer.
• Apply two or more thin, even coats
• Allow each coat to dry for at least 4 hours before applying the next
• Avoid puddling or over-application
• Surface can be walked on after 24 hours, though full stain and abrasion resistance will continue to build over three weeks

Pro Tips & Special Cases

• Always read the label and conduct a test before applying Olé to ensure proper bonding and finish.
• For dense materials like Super Saltillo, machine-made pavers, or previously sealed tiles, dilute the first coat with water to improve adhesion.
• Need a grout release? Apply two coats of Olé at least 48 hours before grouting. After grouting and cleaning, wait 24 hours before sealing the grout.
  

Maintenance Guidance

Indoor Maintenance

• Protect your sealed surface with Glaze ’N Seal Floor Polish
• Use felt or soft pads under furniture legs
• Clean regularly with a slightly damp mop or cloth

Outdoor Maintenance

• Clean surfaces with water or Glaze 'N Seal Neutral Cleaner as needed
• Reapply Olé as desired to refresh appearance and protection
  

Installing handmade tile takes patience, precision, and an eye for detail—but it’s worth it. Proper sealing ensures that your tile remains beautiful and protected for years to come. For more tips and guidance, check out our full Installation + Maintenance Guides.