POLISH TOP COAT SEALER COVERAGE CALCULATOR
COVERAGE CALCULATOR
Estimated amount needed:
Coverage is an estimate and varies by tile porosity, surface condition, weather, and application method.
PRODUCT CHARACTERISTICS
Select a sealer to view its product characteristics.
Satin finish
Soft semi-gloss finish that enhances porous tile
Water-based, ultra-low VOC
Minimal odor with easy soap-and-water cleanup
Interior and exterior use
Suitable for most residential and commercial spaces
Primary sealer or top coat
Film-forming protection for unsealed or lightly sealed terracotta
Natural, invisible finish
Maintains the tile’s original color and texture
Solvent-based formula
Penetrates deeply into porous tile
Interior, exterior, and wet-area use
Water- and oil-resistant protection for demanding installations
Primary sealer or pre-sealer
Protects porous tile without forming a surface coating
Gloss finish
Creates a medium-to-high shine
Water-based formula
Low-VOC top coat applied over an already sealed surface
Interior dry-area use
Designed for interior applications only
Final top coat
Adds sheen and durability to sealed terracotta
APPLICATION + CURE
Select a sealer to view its application and cure notes.
Best for: Organic Terracotta, Reverse Terracotta, Satin Sealed Terracotta, and Matte Sealed Terracotta.
Use stage: Primary sealer or top coat for first-time sealing or surface finishing.
Recommended coats: Apply 1–2 coats, depending on the material.
Application: Apply by brush, paint pad, or spray.
Recoat: Allow approximately 4 hours before recoating.
Dry time: Approximately 30 minutes to the touch and 12 hours before use. Drying time varies with weather, air circulation, and temperature.
Best for: Cotto Terracotta, Terracotta Pavers, Matte Sealed Terracotta, Dip-Sealed Tile, Glazed Terracotta, Clay Tiles, and Pattern Clay Tiles.
Use stage: Primary sealer or pre-sealer before finishing.
Recommended coats: Apply 2 or more coats until the tile stops readily absorbing the product.
Application: Apply by brush, paint pad, or spray.
Recoat: Apply the next coat once the previous coat has fully absorbed, typically within 1–2 hours.
Dry time: The surface should feel dry within a few hours. Allow approximately 24 hours before regular use. Highly porous surfaces may require additional coats.
Best for: Gloss Sealed Terracotta.
Use stage: Apply as the final top coat over an already sealed surface.
Recommended coats: Apply 1–2 coats, building to the desired sheen.
Application: Apply by brush, paint pad, or spray.
Important: Interior dry-area use only. Do not apply directly to unsealed or highly porous tile.
-
Ultra-Low VOC Satin Sealer
Regular price From $7.99Regular priceUnit price per -
Penetrating Sealer
Regular price From $7.99Regular priceUnit price per -
Polish Top Coat Sealer
Regular price From $7.99Regular priceUnit price per -
Polish Top Coat Remover
Regular price From $7.99Regular priceUnit price per -
Palo Santo Cleaner Concentrate
Regular price $30.00Regular priceUnit price per -
Unscented Cleaner Concentrate
Regular price $28.00Regular priceUnit price per -
Olé Terracotta High-Gloss Sealer
Regular price From $7.99Regular priceUnit price per -
Miracle 511 Impregnator Sealer
Regular price From $50.00Regular priceUnit price per
